Grate plate is mainly used in devices such as hammer crusher, grinding machine, because this kind of crusher are impingement and broken form, therefore, crusher grate plate in collisions with the impact of the material is easy broken, so our company in the research and development of gas plate using high manganese steel and other materials, greatly enhance the toughness and wear resistance, the crusher material being back to the plate and gas by secondary crushing, Ensure that the grate panel screens the broken products better.

The wearing parts of  hammer  crusher  grate  plate , The main reason for grate damage  is  the impact wear of materials .When there are hard  materials or  unbreakable materials  entering the crushing chamber , It woll aggravate the blocking of  grate, The material in the crushing chamber will aggravate The laod of  grate, Easy to  cause grate plate  . If the screen is worn seriously or broken, it will cause the discharging grain size is too large, if the screen gap is blocked, feeding is uneven, it will cause the hammer machine output is reduced, at this time to clean up the plug in the screen gap, adjust the feeding structure. The grate grate grate is 50mm higher than the grate grate. The grate grate grate can also be welded on the side of the grate grate to strengthen the grate grate grate grate effectively. In order to avoid the damage to  The grate  plate by  foreign matter, The operator often checks the grate plate when  he finds abnormal sound.

The circular discharge screen is installed under the rotor, and the two ends of the grate are installed on the beam. The grate outside the soldier is pressed with a pressing plate. The direction of the arrangement of the grate is perpendicular to the direction of the rotor movement. The grate gap is formed by the projecting part in the middle of the grate bar. In order to facilitate material discharge. The grate gap gradually enlarges downward and at the same time inclines to the rotation direction of the rotor.